Haier Washer HQM62 K User Manual

Fully Automatic Washing Machine  
User's manual  
This manual is for  
HQM62-K  
Special number:0030506681  
Please read this manual  
carefully before using.  
 
Retain it for future reference.  
Before Using  
Before Using  
Names of the parts  
Top lidA  
Top lid B  
Detergent box  
water valve  
Sop mat  
Cabinet handle  
Drain hose  
(Installed by user)  
Lint filter  
Control panel  
Filter cover  
Inner tub  
Power line  
Control panel  
film  
Pulsator  
back cover  
Cabinet  
fixed foot (3)  
base frame  
Adjustable foot  
Meaning and description of the symbols  
Contents marked with that symbol are related to the safety  
of the product and the personal safety of the users. Please  
operate in strict conformity to the contents, otherwise it may  
cause damage of the machine or injure the personal safety  
of the user.  
Warning sign  
Contents marked with that symbol are actions forbidden to  
perform. Performing of those actions may result in damage  
of the machine or injure the personal safety of the user.  
Forbidden sign  
 
1
Safety precautions  
Before Using  
Before Using  
The power cord plug should be convenient  
to be pluged in or pluged out with hand  
while the washing machine runs normally.  
Be sure to pull the plug out and close the  
water tap when the machine is idle,when  
moving the machine,or when cleaning  
the machine.Do not use wet hand to ins-  
ert or pull out the power plug.  
Please plug the plug on special 220V AC  
receptacle.Be sure to use single-phase  
tow pins receptacle.Ensurethe earthing  
prong of the power receptacle is earthed  
reliably.Use leakage protector if possible.  
Do not damage the power cord,bend ,extend,twist,bind or alter it by force.Do not press or  
nip it with weight.If the power cord or the power plug is bad, or the power plug becomes  
flexible,to avoid risk it is required to have it replaced by  
the technicians of our special shop or the after-sale  
service department. Keep the pin of the power plug  
clean,if the power plug is polluted with dust,please  
wipe with dry cloth carefully.  
Do not put the machine at damp place like  
Do not use water hotter above 50 C .  
the bathroom. Never wash it with water.  
Not put wet laundries on the control panel.  
In case the washing machine is installed  
on ground with carpet, do not block the  
ventilation hole with carpet.  
Do not wash water-proof laundries like  
the raincoat, bike covers etc. to avoid  
abnormal vibrations in spinning.  
The ventilation holes  
at the bottom  
soft items  
Do not let the machine share one receptacle with other  
electric appliances. If the power plug is damaged, or  
the plugging into the receptacle is loose,  
do not use the plug any more.  
 
2
Safety precautions  
Before Using  
Before Using  
Do not stretch hands into the working  
machine. It is dangerous even if the  
rotation is slow. Take special care of  
the children.Do not let the children  
climb the washing machine.  
Do not decompose, repair or alter the  
machine by yourself.  
Do not put any hot or heavy items (such  
as the kettle with hot water ) on the  
washing machine.  
Do not wash laundries with volatile  
materials (such as thinner, petrol etc.)  
l
Petro  
nner  
Thi  
The handicapped or children without  
care shall not use the machine.  
Keep the machine away from direct  
sunlight and heat source like the heater.  
 
3
Before Using  
Before Using  
Installation and adjustment  
Please install and adjust the machine according to the requirement of the manual. It is  
very important to your security and correct operating the machine.  
Install the lint filter  
Install the bottom plate  
After you open the package, please lean  
the washing machine gently down on soft  
items ( like the towel cloth,blanket, etc. ).  
Install the bottom plate to the bottom of the  
machine with the eight screws by a cross  
screwdriver, then lift the machine up gently.  
See to the figure:  
1.Press downward to  
assmble.  
2.Pull upward to detach.  
Back  
Front  
Put up  
Pull down  
Put up  
Pull down  
Soft items  
Screw  
Bottom plate  
Adjust the installation position  
The largest allowed slope of the  
shank base of the machine is 2  
.
The slanting or rough ground will  
result in unstable running or  
stoppage of the machine. Please  
adjust it with following methods:  
Adjust the adjustable foot:  
1.To twist the adjustable foot, please  
first lift up the side of the foot slightly,  
loosen the adjustable nut, and twist  
the foot.  
adjustable nut  
Fasten  
adjustable foot  
Loosen  
High  
Low  
2.Fasten the nut after adjustment.  
4
 
Before Using  
Before Using  
How to change the direction of the drain hose  
1.Lean the machinedown gently withthe front 3.Extend the drain hose from the left side. Push the  
surface facing theground. Loosen theeight drain hose into the groove with hands.  
screws by across screwdriver.  
Bottom plate  
Back  
Front  
Push the drain hose  
into the groove with  
hands at this point  
Soft item  
2.Pull out the drain hose from the groove at the  
right side.  
4.Install the bottom plate (as per indicated  
before), then lift the machine up gently.  
Use groove at  
Page 4  
this side after  
direction changing  
Usage of the drain hose  
The drain hose shall drain smoothly  
4.If extra drain hose is needed, please  
make separate purchase. The inner  
diameter of the extra hose shall not  
less than 30mm, and the length shall  
not exceed 1.5m.  
1.The height of the drain hose shall be  
less than 10cm, or the drainage will not  
be smooth, and cost such long time that  
the machine may stop at mid way.  
2.Do not trample or press the drain hose.  
If the extra hose is too long, cut it  
either atA or at B point.  
If the drain hose is too long, cut it at mid  
point. To make smooth drainage, cut the  
front end of the hose slantingly.  
 
5
Before Using  
Before Using  
Install the water inlet hose  
Confirm the water tap  
Water tap,not suitable  
Water tap,suitable  
Outlet end surface  
>10mm  
It is required that the front end shall be longer than 10mm.  
The outlet end surface of the tap shall be flat and smooth. If not please file it to  
avoid leakage.  
Connection between the water inlet hose jointer and  
the water tap  
1.Use the new water inlet hose provided with the machine to connect to the water  
faucet.Old hose sets should not be reused.  
2.Press the lower end of the lock lever and push down the slider. Take off the water  
inlet hose jointer from the water inlet hose component. See to Figure 1.  
3.Loosen the screw till the water tap can be accessed. Put the jointer of the water  
inlet hose on the tap. See to Figure 2. (If the tap diameter is too large and the jointer  
can not be set on the water tap, please loosen the four screws and take out the  
bushing in the jointer. See to the figure3.)  
Water inlet pipe jointer  
Screw  
Slider  
Mark label  
Screwdriver  
bushing  
Locking lever  
Water inlet pipe  
Figure 1  
Figure 2  
Figure 3  
4.Fasten the four screws evenly. See to Figure 4.  
5.Take off the nameplate. Twist the fastening nut as per the indication of the figure.  
See to Figure 5.  
Remarks: Before twisting the fastening nut, the thread is 4mm above the  
upper surface ofthe nut. After twisting the fastening nut, the thread is2mm  
above the upper surface of the nut. See to Figure 6.  
About 4mm before twisting  
About below 2mm after twisting  
Nut  
Figure 4  
Figure 5  
Figure 6  
 
6
Before Using  
Before Using  
Connection between the water inlet hose and the  
washing machine  
1.Do not takeoff the water absorption  
cushion. Please checkif the cushion  
is dropped ordamaged before each  
usage. If ithappens please contact  
our after-sale departmentimmediately.  
2.Put the nutof the waterinlet hose on  
the valve jointer.  
Nut of the water inlet hose  
3.Fasten the nut. Swaying it gentlyto  
confirm if it'ssuitable.  
Water absorption cushion  
Jointer of thewater inlet valve  
Connection between the jointer of the water inlet  
hose and the water inlet hose  
1.Push down theslider. Insertthe  
Jointer of thewater  
inlet hose  
water inlet hoseinto the jointer.  
2.Hang the locklever to thejointer.  
Release the slidertill a click  
sound is heard.  
Slider  
Locking lever  
Check the connection between the jointer of the  
water inlet hose and the water tap  
1.Swaying the hose gently to confirm if it is fastened  
stable.  
2.After installation, openthe tap tocheck if itleaks.  
3.Do not bend the hose with overstrain.  
4.Before each usage please check if  
the connection between the jointer  
of the water inlet hose and the water  
tap, and the installation of the  
water inlet hoseare firm, soas to  
prevent dropping from improper  
Take down the water inlet hose  
1.Close the water tap.  
2.Press the locking lever. Push down the slider. Then  
pull off the water inlet hose. If the machine is used  
more than once every week, the jointer of the water  
inlet hose can be kept on the tap to prevent  
damaging the fixing screw.  
Locking lever  
Slider  
 
7
Preparation before washing  
Using process  
i
Preparation before washing  
1.Connect the water inlet hose and open  
the water tap .  
2.Confirm that the washing machine is  
earthed reliably . Then insert the power  
plug into the receptacle. Do not connect  
the earth terminal to the gas pipe and  
tap water pipe.  
3.Put down the drain hose.  
Pay attention to followings before washing the laundries  
Confirm  
if  
Clear the pocket. Fasten the The quantity of  
When the pulsator  
the laundries is running , the  
shall not exceed buttons of the  
the rated value. laundries may  
The big laundries cause noise. For  
there's special Take out the  
requirment for coins , sand,  
the laundries. hairpins etc.  
buttons and  
zippers.  
like the jeans  
shall be put in  
loosely.  
t h e s a k e o f  
discretion,please  
put the laundries  
with buttons into  
other laundries.  
a.Please check if the laundries are applicable for washing.  
b.Separate those not colorfast from other laundries.  
c.For laundries not waterabsorbing,please put them into water with hands.  
d.For laundries with much soil,please remove the soil first.You can add detergent on the  
part with serious soil directly.It is much easier to remove the soil by that mean.  
e.For laundries likely to get lint ball or with long fiber,please first turn the inside out before  
putting them into the water.  
f.Do not put the laundries polluted with chemicals directly into the washing machine.  
g.For those small laundries ,laundries likely to be twisted or worn,and woolen laundries,  
please put them into mesh bag before wasing.  
 
8
Using process  
i
Put in the laundries  
The capacity ofwashing and spinningof the  
machine refer tothe largest weightof the standard  
laundries under drycondition that canbe washed  
or spinned inone time. Onetime washing quantity  
shall be lowerthan the ratedcapacity. The largest  
capacity of thismachine is 6.2kg.  
The thickness, size, type of thecloth will influence  
the actual washingcapacity. Itis suitable forone  
time washing toput in reasonableamount of  
laundries and thelaundries can beturned round in  
washing.  
Do not select"High" water levelfor laundries less  
than 1.0kg, soas to avoidsplashing of water.  
To wash thin laundrieslike the stocking, silk etc.,  
please first putthem into washingmesh bag (which  
can be purchasedseparately) before wash.  
Usage of the detergent  
How to use the washing  
powder  
Direct dissolved in the machine  
1.Fill water to "Low" water level.  
2.Add the power. Run for 30 seconds  
to dissolve it completely.  
Inlet box of the detergent  
3.Put in thelaundries. Select  
suitable water level.  
The instant dissolving of the washing  
powder:  
How to usethe whitener  
1.Prepare warm water of 30 and a  
container.  
2.Add the powderwhile stirring to  
fully dissolve it.  
Put in the prorer quantities detergent  
according to the water level and the  
laundries quantities .  
It is suggested not to use high  
sudsing detergent.  
Fill water to decided level. Dilute  
the whitener with container. Pour  
it slowly into the washing tub.  
Avoid using whitener on  
laundries with color or pattern as  
they are prone to lose color.  
The whitener shall not touch the  
laundries directly.  
Refer to the user's manual for  
the usage and quantity of the  
whitener.  
For powder whitener, please  
dissolve it before use.  
Washing powder with poor qualityor  
long time storage maybe caked.  
Please pay attention to cleaning the  
detergent box intime  
 
9
Use the operation buttons  
Using process  
i
a. Description of the function of the buttons  
SURPLUS(MIN)  
"POWER ON/OFF"button  
To indicate -- during sensing.  
To indicate remaining min. During  
program running.  
Press "Power On/Off"button to connect  
power supply.  
After power is connected, pressing this  
button will cut off the supply.  
To indicate remaining reserved  
time (hrs) during reservation period.  
To indicate fault symbols for abnormal  
"START/PAUSE"button  
conditions (see page 15)  
Page 15  
After the power is switched on, press it to  
start the machine  
During working, push it to pause working.  
During pause, push this button to restart  
and continue operation.  
PROGRAM STATUS  
PROCEDURE STATUS  
HQM62-K  
STANDARD  
JEANS  
SOAK  
WASH  
RINSE  
SPIN  
GENTLE  
QUICK WASH  
WASH  
SPIN  
POWER  
ON/OFF  
START  
PAUSE  
PROGRAM  
RESERVATION  
WATER LEVEL  
on  
utt  
" b  
" WATER LEVEL"button  
RESERVATION  
M/  
"PROGRA  
Press"PROGRAM/RESERVATION " button  
you can select one or several programs of  
Standard,Je ansG, entle,Quick,Rinse and Spin.  
Press"PROGRAM/RESERVATION " button  
over 2 seconds, you can select the program  
of peservtion.the Nixie tube displays the  
reserved hrs to the wash cycle end. The  
indicator flashes to indicate in-reservation.  
The user selects a suitable water level  
depending on the load.  
Remarks: After pressing "POWER ON/OFF" to connect power supply, if the washing machine  
lasts idle more than 10 min, it would automatically shut off the supply.  
 
10  
Use the operation buttons  
Using process  
i
b.  
Operating procedure and explanations for the  
buttons  
PROGRAM STATUS  
PROCEDURE STATUS  
HQM62-K  
STANDARD  
JEANS  
SOAK  
WASH  
RINSE  
SPIN  
GENTLE  
QUICK WASH  
WASH  
SPIN  
POWER  
ON/OFF  
START  
PAUSE  
PROGRAM  
RESERVATION  
WATER LEVEL  
1 Press the "POWER ON/OFF" button to switch on  
the power supply  
POWER  
ON/OFF  
2 Press the button of" PROGRAM/RESERVATION" to  
select a suitable full-automatic program  
PROGRAM  
RESERVATION  
After switching on, the "Standard" program will be thedefault. If other full-automatic program is  
desired, you can press thebutton "PROGRAM/RESERVATION" to getthe corresponding  
indicator on. Refer to the"Button of 'PROGRAM/RESERVATION'"  
paragraph on page 10.  
Example: Use the "Quick" program for slightly soiled articles.  
Page 10  
When "standard" programis selected, thewashing  
machine will performfull-automatically controlled fuzzy  
program to setwater level, waterflow and washduration  
according to thecloth nature andweight  
 
11  
Using process  
i
Attention  
Even there's no water inthe tub, the  
spinning will startafter a certain period.  
Do not usesoak process forwoolen laundries.  
Wash the laundries that are prone to lose  
colors separately from other laundries.  
The pulsator will not rotate unless the  
water is filled to selected water level.  
Selection method of the procedure programs  
Times of pushing  
the"select"button  
Contents(tthe nixie tube indicates  
the programs about to run)  
Selected program  
Applicable procedure  
0
1
2
3
4
5
Normal wash  
STANDARD  
JEANS  
Wash (bb) Rinse(cc) Spin(dd)  
Large, thick or heavily soiled  
laundry  
Soak (AA) Wash (bb)  
Rinse (CC) Spin (dd)  
The laundry needn'tspin to  
avoid wrinkles  
GENTLE  
Wash (bb) Rinse(cc) Spin(dd)  
Wash (bb)  
QUICK WASH  
For load below 1 Kg  
Repeat using thewashing  
liquid  
WASH  
SPIN  
Wash (bb) Rinse(cc) Spin(dd)  
Spin(dd)  
When the laundriesneed only  
spinning after manual  
washing (first drainthen spin)  
If you pushthe "PROCEDURE SELECTION"button for 6times, it willresume the  
original mode, andit will circulatelike that.  
If you selectthe"QUICK WASH" program, you haveto set thefull procedure of  
wash, rinse andspin. The procedure can notbe selected.  
 
12  
Using process  
i
3 Press the "WATER LEVEL" button to select suitable  
water level  
WATER LEVEL  
After switching on the power, press the button "WATER LEVEL" to select a water level according  
to the load. Please refer to the button " Water level" on page 10.  
Page 10  
4 Push the " PROGRAM/RESERVATION" button  
to select suitable reserve program  
PROGRAM  
RESERVATION  
After switching on, the washing machinereserved wash programwill be automaticallyset  
inactive. If youdesire a washcycle to endat a reservedtime, you canpress the  
"PROGRAM/RESERVATION"button over 2 seconds to set a reserved wash program.  
Refer to The button of "PROGRAM/RESERVATION" on page 10.  
Page 10  
Confirm the reserveprogram  
When "Reservation" becomes active, thenixie tube  
displays the timeto the endof the reservedwash cycle, and  
the indicator turnson.  
To change the runningprogram or cancelthe reservation,  
you should cutoff the supplyand reselect.  
the washing will finish  
about 18 hours later  
5 Press the "start/pause" button  
START  
PAUSE  
Close the top lid  
Except water filling and draining, if the  
top cover is opened, the washing  
machine will stop running and alarm.  
Finish washing  
The washing machinecuts off thepower supply  
automatically when washcycle ends.  
 
13  
Disposal after washing  
Using process  
i
After using, please clean the lint and foreign materials of the lint filter etc. in time.  
Otherwise it may influence your using the machine.  
Please first pull off the power plug from the receptacle before cleaning.  
When washing, lint filter must be used  
After using, please clean it in time.  
Lint filter:  
1.Pull upward to detach  
Clean  
Figure 1  
2.Clean the lint  
Put it in water and clean while it is still wet.  
(See to Figure 1).  
Put up  
3.Press downward to assemble.  
Pull down  
Put up  
Pull down  
Figure 2  
If the cabinet is dirty, wipe it with wet cloth  
Do not flush it directly with water.  
Wipe it with neutral detergent.  
Do not wipe it with thinner, petrol,  
alcoholetc.  
The filter screen of the water inlet  
valve is likely to be blocked by  
foreign materials andinfluence  
the water inlet. Please clean it  
Alcohol  
Petrol  
inner  
Th  
1.After washing, close the water faucet. ( If needed, you can dismantle the water inlet hose).  
2.Do not store water in the washing machine for a long period. Drain the water completely after each using.  
3.Be sure to pull off the power plug before maintenance.  
4.Hang up the power cord and drain hose.  
5.Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid for some time  
(about 1 hour), then close the top lid.  
 
14  
Trouble shooting Answer to question  
(If there's breakdown, please pull off the powerplug before checking)The following  
phenomena are notbreakdowns sometimes. Pleaseconfirm again beforesending it to  
repair. Ifthere are realbreakdowns, please cometo the specialmaintenance department or  
after-sale service departmentof our company. Do notrepair it byyourself.  
Phenomena  
The reason  
How to settle  
Buzzing upon reservation starts,  
Nixie tube indicates "E0"  
The top lid is not closed  
Close the top lid  
Put down the drain hose. Open  
and close the top lid once.  
Clean the foreign material.  
Open and close the top lid once.  
Is the drain hose put down?  
No or slow drain, nixie tube  
indicates "E1" , buzzing.  
Is the drain hose blocked by  
foreign material?  
Running pauses during spin,  
nixie tube indicates "E2",  
buzzing  
The top cover leaves open  
Close the top lid  
Re-order the laundries. Closethe  
top lid.Level the machinein right  
position.  
Are the laundries put slantingly?  
Is the machine slanting?  
Safety switch actuates, not  
spin, (after self-correction  
twice), nixie tube displays  
"E3", buzzing  
Open and close thetop lid once.  
Open the water tap.Push  
the "Start/Pause" button.  
Clean the water inletvalve.  
Push the "Start/Pause" button.  
Wait for thenormal water pressure  
Before use.  
The water tap is not open  
No or slow water filling (not  
reaching the level in 15 min),  
nixie tube indicates "E4",  
buzzing  
The water inlet valve is blocked  
The water pressureis too  
low and the current is  
too small  
Poor or no waterfall flow  
If the nozzle is choked with  
foreign bodies  
Remove the foreign bodies  
Use it when the power is on.  
Is there power failure?  
Is the power plug loose?  
Insert the power plug tightly.  
Affusion to the set water level.  
Not wash  
The machine does  
not act  
Does the water level arrive at the  
set water level?  
Is the power plug loose?  
Is the top lid closed?  
Insert the power plug tightly.  
Close the top lid  
Not spin  
Are the laundries put orderly?  
Put the laundries orderly.  
Is the machine slanting?  
Level the machine properly.  
Re-order the laundries.  
There's abnormal sound inside the  
machine  
Are the laundries slanting in  
spinning?  
Is the jointer screw of the water  
inlet hose is loose or twisted  
awry?  
Fasten the jointer screw  
properly.  
The water faucet leaks  
15  
 
Packing list  
Name  
Quantity  
Storage position  
Inside the document bag  
One  
User's manual  
Components of thewater  
inlet hose  
Inside the accessory bag  
One  
Lint filter  
Two  
Inside the document bag  
Bottom plate  
Between the upper cushion of the  
washing machine package and the  
upper seal of the package carton  
One  
Tapping screws ST4x16  
Inside the document bag  
Eight  
One  
Automatic washing machine  
16  
 
 
 

Grindmaster Refrigerator 6321L User Manual
HANNspree Flat Panel Television ST03 15A1 User Manual
Hayter Mowers Lawn Mower RRS82H User Manual
Honeywell Home Security System 128BPTSIA User Manual
Hoshizaki Ice Maker KM 2500SRH3 User Manual
HP Hewlett Packard Calculator 17bII User Manual
HP Hewlett Packard Network Card HP E5200A User Manual
HP Hewlett Packard Printer 1050C User Manual
HP Hewlett Packard Tablet XT962UA User Manual
Image Treadmill IMTL07610 User Manual