COMBIPOWERVAC®
Dust Extraction, Vacuum
& Blower System
Model WD1200P
PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USE.
Please retain for future reference.
Earlex Ltd will accept no responsibility for the use of this product if
used for any other purposes than those detailed in this manual.
WHAT’S INCLUDED
The following components are included in this product.
WD0001
WD0035
WD0036
WD0045
WD0050
WD0217
WD0083
Collection Bin
Hose Inlet
Crevice Tool
Castors x 4
Hose
WD0147
WD0178
WD0181
WD0182
WD0183
WD0188
WDACC4
Outlet Elbow
Cellulose Cartridge Filter
Power Tool Adaptor
Floor Head Brush/Squeegee Attachment
Outriggers x 4
Dust Collection Bag
Extension Tubes
Motor Housing
Floor Head
Follow these simple instructions to
assemble your CombiVac® before use.
FITTINg THE FILTER
& DUST COLLECTION BAg
WARNINg - DISCONNECT FROM POWER
SUPPLY BEFORE OPENINg
1. Remove all packing materials
and remove unit from box.
2. Release the two tank clips on
either side of the black rim and lift
the motor housing off the collection bin.
CAUTION
NEVER OPERATE THIS UNIT WITHOUT THE
CORRECT FILTER FITTED.
3. Remove all accessories from inside the tank.
Failure to do so will invalidate the guarantee. A clean
filter is essential to this unit for it to operate
efficiently. If the filter becomes clogged or damaged,
or fails to operate, you must fit an Earlex
replacement. Please call 01483 454666 for more
4. Fit castors into outriggers. Ensure the castors are
fitted all the way in.
5. Tu</ |